50c32984-2636-4825-bb3b-0f68344700f9

Fluoroelastomer Molding EE96160F

60 durometer brown FDA Viton A fluoroelastomer compound

 % Fluorine: 66%
 Cure System: Bisphenol
 Color: Brown
 Compounded for: Transfer,injection & compression molding
 Form Slab, Strip, Calendered Sheet or Pre-form.
 Storage Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months.

Conditions: MDR .5 ARC 4 minutes @ 370º F (188º C) Per ASTM D-6204.
 Min torque: 1.13 Inch/lbs.
 Max torque: 12.68 Inch/lbs.
 Scorch Ts1: 0.59 Minutes.
 Cure Tc90: 0.89 Minutes.

 Conditions: Press cured 10 minutes @ 370º F (188º C) and Post cured for 16 hours @ 480º F (250 ºC).
 Tensile Strength (Per ASTM D-412): 1826 PSI (12.6 Mpa)
 100% Modulus (Per ASTM D-412): 331 PSI ( 2.3 Mpa)
 Ultimate Elongation (Per ASTM D-412): 289 %
 Shore A Hardness (Per ASTM D-2240): 58 Pts.
 Specific Gravity (Per ASTM D-297): 2.00 (H2O=1)
 Compression Set (Per ASTM D-395): 6.72 % CONDITIONS: 22 hrs@ 392 ºF (200ºC)





Additional Information

Application

Compression, Injection, Transfer

Durometer

60

Polymer Type

Viton A™

Color

Brown

Form

Extruded Pre-Form, Slab, Strip, Calendered Sheet

Minimum TensIle Strength (PSI)

1826

Stock

Yes

Cured Products

Compounded to Meet

FDA Compliant

Reviews

There are no reviews yet.

Be the first to review “Fluoroelastomer Molding EE96160F”

Your email address will not be published. Required fields are marked *