Additional information
Application | Compression, Injection, Transfer |
---|---|
Durometer | 75 |
Polymer Type | AFLAS |
Color | Black |
Form | Slab, Strip, Extruded Pre-Form, Calendered Sheet |
Minimum TensIle Strength (PSI) | 1550 |
Stock | Yes |
% Fluorine: | 57% |
Cure System: | Peroxide |
Color: | Black |
Compounded for: | Molding:(Compression, Injection, Transfer) and Extrusion. |
Form: | Slab, Strip, Pre-form or Calendered Sheet. |
Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
Cured Products: | O-Ring Cord, Profiles, Sheet, and Tubing |
Stock: | Yes |
Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
Min torque: | 1.34 Inch/lbs. |
Max torque: | 7.66 Inch/lbs. |
Scorch Ts1: | 0.60 Minutes. |
Cure Tc90: | 2.60 Minutes. |
Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
Tensile Strength (Per ASTM D-412): | 1550 PSI ( 10.7 Mpa) |
100% Modulus (Per ASTM D-412): | 750 PSI (5.2 Mpa) |
Ultimate Elongation (Per ASTM D-412): | 355 % |
Shore A Hardness (Per ASTM D-2240): | 76 Pts. |
Specific Gravity (Per ASTM D-297): | 1.61 (H2O=1) |
Compression Set (Per ASTM D-395): | 31.88 % Conditions: 22 hrs@ 392ºF (200ºC) |
Application | Compression, Injection, Transfer |
---|---|
Durometer | 75 |
Polymer Type | AFLAS |
Color | Black |
Form | Slab, Strip, Extruded Pre-Form, Calendered Sheet |
Minimum TensIle Strength (PSI) | 1550 |
Stock | Yes |
Send us a message and one of our customer service representatives will contact you within 24 hours.
Contact ×