Additional information
| Application | Compression, Transfer |
|---|---|
| Durometer | 75 |
| Polymer Type | AFLAS |
| Color | Tan |
| Form | Slab, Strip, Calendered Sheet |
| Minimum TensIle Strength (PSI) | 1550 |
| Stock | Yes |
| Cured Products | – |
Fluoroelastomer Specialists
Part #ee30675r
AFLAS Fluoroelastomer Compound EE30675R
75 durometer tan AFLAS fluoroelastomer compound.
Categories: 72-75 Durometer, By Durometer, Compound Mixes
Durometer: 75
Color: Tan
Polymer: AFLAS
Color: Tan
Polymer: AFLAS
| % Fluorine: | 57% |
| Cure System: | Peroxide |
| Color: | Tan |
| Compounded for: | Transfer & compression molding. |
| Form: | Slab, Strip or Calendered Sheet. |
| Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
| Min torque: | 1.73 Inch/lbs. |
| Max torque: | 7.86 Inch/lbs. |
| Scorch Ts1: | 0.50 Minutes. |
| Cure Tc90: | 1.99 Minutes. |
Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
| Tensile Strength (Per ASTM D-412): | 1550 PSI (10.7 MPa) |
| 100% Modulus (Per ASTM D-412): | 1050 PSI ( 7.2 MPa) |
| Ultimate Elongation (Per ASTM D-412): | 200 % |
| Shore A Hardness (Per ASTM D-2240): | 73 Pts. |
| Specific Gravity (Per ASTM D-297): | 2.05 (H2O=1) |
| Compression Set (Per ASTM D-395): | 32.64 % Conditions: 22 hrs@ 392ºF (200ºC) |
To place an order, Minimum Quantity must be 1 ft.
