Additional information
| Application | Compression, Injection, Transfer |
|---|---|
| Durometer | 75 |
| Polymer Type | AFLAS |
| Color | Black |
| Form | Slab, Strip, Calendered Sheet |
| Minimum TensIle Strength (PSI) | 2550 |
| Stock | Yes |
Fluoroelastomer Specialists
Part #ee30678a
AFLAS Fluoroelastomer Compound EE30678A
75 Durometer black AFLAS fluoroelastomer compound.
Durometer: 75
Color: Black
Polymer: AFLAS
Color: Black
Polymer: AFLAS
| % Fluorine: | 57% |
| Cure System: | Peroxide |
| Color: | Black |
| Compounded for: | Molding:(Compression, Injection, Transfer) |
| Form: | Slab, Strip or Calendered Sheet. |
| Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
| Cured Products: | Sheet |
| Stock: | Yes |
Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
| Min torque: | 3.00 Inch/lbs. |
| Max torque: | 12.00 Inch/lbs. |
| Scorch Ts1: | 0.50 Minutes. |
| Cure Tc90: | 1.95 Minutes. |
Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
| Tensile Strength (Per ASTM D-412): | 2550 PSI (17.6 Mpa) |
| 100% Modulus (Per ASTM D-412): | 1180 PSI ( 8.1 Mpa) |
| Ultimate Elongation (Per ASTM D-412): | 230 % |
| Shore A Hardness (Per ASTM D-2240): | 77 Pts. |
| Specific Gravity (Per ASTM D-297): | 1.62 (H2O=1) |
| Compression Set (Per ASTM D-395): | 30.29 % Conditions: 22 hrs@ 392ºF (200ºC) |
