Additional information
| Application | Compression, Injection, Transfer |
|---|---|
| Durometer | 78 |
| Polymer Type | AFLAS |
| Color | Black |
| Form | Slab, Strip, Calendered Sheet |
| Minimum TensIle Strength (PSI) | 1600 |
| Stock | Yes |
Fluoroelastomer Specialists
Part #ee30678b
AFLAS Fluoroelastomer Compound EE30678B
78 Durometer black AFLAS fluoroelastomer compound
Categories: 56-60 Durometer, 76-90 Durometer, By Durometer
Durometer: 78
Color: Black
Polymer: AFLAS
Color: Black
Polymer: AFLAS
| % Fluorine: | 57% |
| Cure System: | Peroxide |
| Color: | Black |
| Compounded for: | Molding:(Compression, Injection, Transfer) and Extrusion |
| Form: | Slab, Strip or Calendered Sheet. |
| Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
| Cured Products: | O-Ring Cord, Profiles, Tubing |
| Stock: | No |
Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
| Min torque: | 2.73 Inch/lbs. |
| Max torque: | 11.71 Inch/lbs. |
| Scorch Ts1: | 0.48 Minutes. |
| Cure Tc90: | 2.02 Minutes. |
Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
| Tensile Strength (Per ASTM D-412): | 1600 PSI (11.0 Mpa) |
| 100% Modulus (Per ASTM D-412): | 900 PSI ( 6.2 Mpa) |
| Ultimate Elongation (Per ASTM D-412): | 175 % |
| Shore A Hardness (Per ASTM D-2240): | 78 Pts. |
| Specific Gravity (Per ASTM D-297): | 1.61 (H2O=1) |
| Compression Set (Per ASTM D-395): | 26.27% Conditions: 22 hrs@ 392ºF (200ºC) |
To place an order, Minimum Quantity must be 1 ft.
