Additional information
| Application | Compression, Injection, Transfer |
|---|---|
| Durometer | 60 |
| Polymer Type | 3M™ Dyneon™ Fluoroelastomers |
| Color | Brown |
| Form | Slab, Strip, Calendered Sheet |
| Minimum TensIle Strength (PSI) | 1555 |
| Stock | Yes |
Fluoroelastomer Specialists
Part #ee56160r
Dyneon Fluoroelastomer Compound EE56160R
60 durometer brown Dyneon fluoroelastomer compound.
Durometer: 60
Color: Brown
Polymer: 3M™ Dyneon™ Fluoroelastomers
Color: Brown
Polymer: 3M™ Dyneon™ Fluoroelastomers
| % Fluorine: | 66% |
| Cure System: | Bisphenol |
| Color: | Brown |
| Compounded for: | Extrusion,transfer, injection & compression molding |
| Form: | Slab, Strip or Calendered Sheet |
| Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
| Cured Products | O-ring cord, tubing & profiles |
Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
| Min torque: | 0.95 Inch/lbs. |
| Max torque: | 14.44 Inch/lbs. |
| Scorch Ts1: | 1.20 Minutes. |
| Cure Tc90: | 2.28 Minutes. |
Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
| Tensile Strength (Per ASTM D-412): | 1555 PSI (10.7 MPa) |
| 100% Modulus (Per ASTM D-412): | 376 PSI ( 2.6 MPa) |
| Ultimate Elongation (Per ASTM D-412): | 234 % |
| Shore A Hardness (Per ASTM D-2240): | 60 Pts. |
| Specific Gravity (Per ASTM D-297): | 1.90 (H2O=1) |
| Compression Set (Per ASTM D-395): | 4.59 % Conditions: 22 hrs@ 392ºF (200ºC) |
