60 durometer black FDA fluoroelastomer compound.
| % Fluorine: | 66% |
| Cure System: | Bisphenol |
| Color: | Black |
| Compounded for: | Extrusion, transfer, injection & compression molding |
| Form: | Slab, Strip or Calendered Sheet. |
| Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
| Min torque: | 1.42 Inch/lbs. |
| Max torque: | 11.94 Inch/lbs. |
| Scorch Ts1: | 1.14 Minutes. |
| Cure Tc90: | 1.85 Minutes. |
Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
| Tensile Strength (Per ASTM D-412): | 1726 PSI (11.9 Mpa) |
| 100% Modulus (Per ASTM D-412): | 478 PSI (3.3Mpa) |
| Ultimate Elongation (Per ASTM D-412): | 225 % |
| Shore A Hardness (Per ASTM D-2240): | 63 Pts. |
| Specific Gravity (Per ASTM D-297): | 1.83 (H2O=1) |
| Compression Set (Per ASTM D-395): | N/A % Conditions: 22 hrs@ 392ºF (200ºC) |
| Application | Compression, Injection, Transfer |
|---|---|
| Durometer | 60 |
| Polymer Type | 3M™ Dyneon™ Fluoroelastomers |
| Color | Black |
| Form | Slab, Strip, Calendered Sheet |
| Minimum TensIle Strength (PSI) | 1726 |
| Stock | Yes |
| Cured Products | – |
| Compounded to Meet | FDA Compliant |
Send us a message and one of our customer service representatives will contact you within 24 hours.
Contact ×
