0.210″+/-.010_(5.33+/-.26 MM) 75 D_BRN_FKM_O-RING CORD
Fluoroelastomer Specialists
Part #CFB0210
Easy Splice 0.210″ +/- .010″ (5.3+/-.29 MM) – 75 Duro – Brown FKM O-Ring Cord
0.210"+/-.010_(5.33+/-.26 MM) 75 D_BRN_FKM_O-RING CORD
Diameter: 0.210" (5.3MM)
Durometer: 75
Color: Brown
Polymer: 3M™ Dyneon™ Fluoroelastomers
Temprature Range: 1.4°F - 400º F
Durometer: 75
Color: Brown
Polymer: 3M™ Dyneon™ Fluoroelastomers
Temprature Range: 1.4°F - 400º F
| % Fluorine: | 66% |
| Cure System: | Bisphenol |
| Color: | Brown |
| Compounded for: | Molding: (Compression, Injection, Transfer) |
| Form: | Pre-Form, Slab, Strip or Calendered Sheet. |
| Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
| Stock: | Yes |
Typical Rheological Properties: Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
| Min torque: | 1.30 Inch/lbs. |
| Max torque: | 23.25 Inch/lbs. |
| Scorch Ts1: | 0.65 Minutes |
| Cure Tc90: | 1.10 Minutes |
Typical Physical Properties: Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
| Tensile Strength (Per ASTM D-412): | 2250 PSI (15.5 MPa) |
| 100% Modulus (Per ASTM D-412): | 920 PSI (6.3 MPa) |
| Ultimate Elongation (Per ASTM D-412): | 198% |
| Shore A Hardness (Per ASTM D-2240): | 76 Pts. |
| Specific Gravity (Per ASTM D-297): | 1.85 (H2O=1) |
| Compression Set (Per ASTM D-395): | 8.56% Conditions: 22 hrs @ 392° F (200° C) |
Additional information
| Standard Increment | 250 |
|---|---|
| UOM | FT |
| Color | Brown |
| Temp High | 400º F ( 204º C) |
| Temp. Min - Dynamic | 1.4°F (-17°C) |
| Temp. Min - Static | -25.6°F(-32°C ) |
| Durometer | 75 |
| Diameter | 0.210″ (5.3MM) |
| Polymer Type | 3M™ Dyneon™ Fluoroelastomers |
