Additional information
| Application | Compression, Transfer |
|---|---|
| Durometer | 75 |
| Polymer Type | Viton B™ |
| Color | Yellow |
| Form | Extruded Pre-Form, Slab, Strip, Calendered Sheet |
| Minimum TensIle Strength (PSI) | 1850 |
| Stock | Yes |
| Cured Products | – |
Fluoroelastomer Specialists
Part #ee97475r
Viton Fluoroelastomer Compound EE97475R
75 durometer yellow Viton B fluoroelastomer compound
Durometer: 75
Color: Yellow
Polymer: Viton B™
Color: Yellow
Polymer: Viton B™
| % Fluorine: | 68% |
| Cure System: | Bisphenol |
| Color: | Yellow |
| Compounded for: | Transfer & compression molding |
| Form: | Slab, Strip, Calendered Sheet or Pre-form. |
| Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
| Min torque: | 1.85 Inch/lbs. |
| Max torque: | 27.09 Inch/lbs. |
| Scorch Ts1: | 1.10 Minutes. |
| Cure Tc90: | 2.75 Minutes. |
Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
| Tensile Strength (Per ASTM D-412): | 1850 PSI (12.7 Mpa) |
| 100% Modulus (Per ASTM D-412): | 780 PSI (5.4 Mpa) |
| Ultimate Elongation (Per ASTM D-412): | 240 % |
| Shore A Hardness (Per ASTM D-2240): | 73 Pts. |
| Specific Gravity (Per ASTM D-297): | 2.21 (H2O=1) |
| Compression Set (Per ASTM D-395): | 20.54 % Conditions: 22 hrs@ 392ºF (200ºC) |
