Part #ee96075axo

Viton Fluoroelastomer Compound EE96075AXO

75 durometer black Viton A fluoroelastomer compound

Durometer: 75
Color: Black
Polymer: Viton A™
% Fluorine: 66%
Cure System: Bisphenol
Color: Black
Compounded for: Transfer, injection, & compression molding. Recommended for thicker cross sections
Form: Slab, Strip or Calendered Sheet.
Storage: Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months.

Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.

Min torque: 0.47 Inch/lbs.
Max torque: 16.08 Inch/lbs.
Scorch Ts1: 0.66 Minutes.
Cure Tc90: 1.24 Minutes

Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).

Tensile Strength (Per ASTM D-412): 2300 PSI (15.9 Mpa)
100% Modulus (Per ASTM D-412): 700 PSI ( 4.8 Mpa)
Ultimate Elongation (Per ASTM D-412): 250%
Shore A Hardness (Per ASTM D-2240): 75 Pts.
Specific Gravity (Per ASTM D-297): 1.85 (H2O=1)
Compression Set (Per ASTM D-395): 10.00 % CONDITIONS: 22 hrs@ 392 ºF (200ºC)
To place an order, Minimum Quantity must be 1 ft.

Additional information


Compression, Injection, Transfer



Polymer Type

Viton A™




Slab, Strip, Calendered Sheet

Minimum TensIle Strength (PSI)




Cured Products