Additional information
| Application | Compression, Injection, Transfer |
|---|---|
| Durometer | 75 |
| Polymer Type | Viton™ |
| Color | Brown |
| Form | Extruded Pre-Form, Slab, Strip, Calendered Sheet |
| Minimum TensIle Strength (PSI) | 2200 |
| Stock | Yes |
Fluoroelastomer Specialists
Part #ee96174r
Viton Fluoroelastomer Compound EE96174R
75 Durometer brown Viton compound
Durometer: 75
Color: Brown
Polymer: Viton™
Color: Brown
Polymer: Viton™
| % Fluorine: | 66% |
| Cure System: | Bisphenol |
| Color: | Brown |
| Compounded for: | Molding:(Compression, Injection, Transfer) and Extrusion |
| Form: | Pre-Form, Slab, Strip or Calendered Sheet. |
| Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
| Cured Products: | O-Ring Cord, Profiles, Tubing |
| Stock: | Yes |
Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
| Min torque: | 1.8 Inch/lbs. |
| Max torque: | 22.5 Inch/lbs. |
| Scorch Ts1: | 0.60 Minutes |
| Cure Tc90: | 0.98 Minutes |
Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
| Tensile Strength (Per ASTM D-412): | 2200 PSI (15.2 Mpa) |
| 100% Modulus (Per ASTM D-412): | 1300 PSI (9.0 Mpa) |
| Ultimate Elongation (Per ASTM D-412): | 150 % |
| Shore A Hardness (Per ASTM D-2240): | 77 Pts |
| Specific Gravity (Per ASTM D-297): | 2.05 (H2O=1) |
| Compression Set (Per ASTM D-395): | 10.00 % CONDITIONS: 22 hrs@ 392 ºF (200ºC) |
