Additional information
| Application | Compression, Injection, Transfer |
|---|---|
| Durometer | 85 |
| Polymer Type | Viton A™ |
| Color | Brown |
| Form | Slab, Strip, Calendered Sheet |
| Minimum TensIle Strength (PSI) | 2300 |
| Stock | Yes |
Fluoroelastomer Specialists
Part #ee96185r
Viton Fluoroelastomer Compound EE96185R
85 Durometer brown Viton A fluoroelastomer compound
Categories: 76-90 Durometer, Compound Mixes, Extrusions
Durometer: 85
Color: Brown
Polymer: Viton A™
Color: Brown
Polymer: Viton A™
| % Fluorine: | 66% |
| Cure System: | Bisphenol |
| Color: | Brown |
| Compounded for: | Molding: (Compression, Injection, Transfer) |
| Form: | Slab, Strip or Calendered Sheet. |
| Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
| Cured Products: | O-Ring Cord, Profile, Sheet, Tubing |
| Stock: | Yes |
Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
| Min torque: | 2.38 Inch/lbs. |
| Max torque: | 24.04 Inch/lbs. |
| Scorch Ts1: | 0.43 Minutes. |
| Cure Tc90: | 0.66 Minutes. |
Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
| Tensile Strength (Per ASTM D-412): | 2300 PSI (15.9 MPa) |
| 100% Modulus (Per ASTM D-412): | 2150 PSI (14.8 MPa) |
| Ultimate Elongation (Per ASTM D-412): | 109 % |
| Shore A Hardness (Per ASTM D-2240): | 83 Pts. |
| Specific Gravity (Per ASTM D-297): | 2.11 (H2O=1) |
| Compression Set (Per ASTM D-395): | 8.36 % CONDITIONS: 22 hrs@ 392 ºF (200ºC) |
To place an order, Minimum Quantity must be 1 ft.
