Additional information
| Application | Compression, Transfer |
|---|---|
| Durometer | 80 |
| Polymer Type | Viton A™ |
| Color | Black |
| Form | Slab, Strip, Calendered Sheet |
| Minimum TensIle Strength (PSI) | 2313 |
| Stock | Yes |
Fluoroelastomer Specialists
Part #ee96280a
Viton Fluoroelastomer Compound EE96280A
80 durometer black Viton™ A fluoroelastomer compound.
Durometer: 80
Color: Black
Polymer: Viton A™
Color: Black
Polymer: Viton A™
| % Fluorine: | 66% |
| Cure System: | Bisphenol |
| Color: | Black |
| Compounded for: | Compression & transfer molding. |
| Form: | Slab, Strip or Calendered Sheet |
| Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
| Cured product | O-ring cord, tubing, profiles, sheet |
| Stock | Yes |
Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
| Min torque: | 1.77 Inch/lbs. |
| Max torque: | 29.40 Inch/lbs. |
| Scorch Ts1: | 0.57 Minutes. |
| Cure Tc90: | 0.97 Minutes. |
Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
| Tensile Strength (Per ASTM D-412): | 2313 PSI (15.9 MPa) |
| 100% Modulus (Per ASTM D-412): | 1375 PSI (9.5 MPa) |
| Ultimate Elongation (Per ASTM D-412): | 157 % |
| Shore A Hardness (Per ASTM D-2240): | 81 Pts. |
| Specific Gravity (Per ASTM D-297): | 1.84 (H2O=1) |
| Compression Set (Per ASTM D-395): | 9.01 % Conditions: 22 hrs@ 392ºF (200ºC) |
