Additional information
| Application | Compression, Transfer |
|---|---|
| Durometer | 60 |
| Polymer Type | Viton GFS™ |
| Color | Green |
| Form | Slab, Strip, Calendered Sheet |
| Minimum TensIle Strength (PSI) | 1200 |
| Stock | Yes |
| Cured Products | – |
Fluoroelastomer Specialists
Part #ee98360lt
Viton Fluoroelastomer Compound EE98360LT
60 durometer green Viton™ GFS fluoroelastomer compound
Durometer: 60
Color: Green
Polymer: Viton GFS™
Color: Green
Polymer: Viton GFS™
| % Fluorine: | 70% |
| Cure System: | Peroxide |
| Color: | Green |
| Compounded for: | Transfer & compression molding. |
| Form: | Slab, Strip, Calendered Sheet. |
| Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
| Min torque: | 1.9 Inch/lbs. |
| Max torque: | 17.5 Inch/lbs. |
| Scorch Ts1: | 0.40 Minutes. |
| Cure Tc90: | 0.95 Minutes. |
Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
| Tensile Strength (Per ASTM D-412): | 1200 PSI (8.3 MPa) |
| 100% Modulus (Per ASTM D-412): | 270 PSI ( 1.9 MPa) |
| Ultimate Elongation (Per ASTM D-412): | 250 % |
| Shore A Hardness (Per ASTM D-2240): | 60 Pts. |
| Specific Gravity (Per ASTM D-297): | 2.07 (H2O=1) |
| Compression Set (Per ASTM D-395): | 12.0 % Conditions: 22 hrs@ 392ºF (200ºC) |
