Additional information
Application | Compression, Injection, Transfer |
---|---|
Durometer | 75 |
Polymer Type | Viton GFLTS™ |
Color | Black |
Form | Extruded Pre-Form, Slab, Strip, Calendered Sheet |
Minimum TensIle Strength (PSI) | 2800 |
Stock | Yes |
% Fluorine: | 67% |
Cure System: | Peroxide |
Color: | Black |
Compounded for: | Molding:( Compression, Injection, Transfer) |
Form: | Pre-Form, Slab, Strip or Calendered Sheet. |
Storage: | Preserves best when stored in a cool/dry environment. Rheometer retesting suggested @ 6 months. |
Cured Product: | O-Ring Cord, Profile, Sheet, Tubing |
Stock: | Yes |
Typical Rheological Properties:
Conditions: MDR .5 ARC 4 minutes @ 370° F (188° C) Per ASTM D-6204.
Min torque: | 1.90 Inch/lbs. |
Max torque: | 26.40 Inch/lbs. |
Scorch Ts1: | 0.25 Minutes. |
Cure Tc90: | 0.60 Minutes. |
Typical Physical Properties:
Conditions: Press cured 10 minutes @ 370° F (188° C) and Post cured for 16 hours @ 480° F (250° C).
Tensile Strength (Per ASTM D-412): | 2800 PSI (19.3 MPa) |
100% Modulus (Per ASTM D-412): | 925 PSI (6.4 MPa) |
Ultimate Elongation (Per ASTM D-412): | 225 % |
Shore A Hardness (Per ASTM D-2240): | 78 Pts. |
Specific Gravity (Per ASTM D-297): | 1.87 (H2O=1) |
Compression Set (Per ASTM D-395): | 16.00 % Conditions: 22 hrs@ 392ºF (200ºC) |
Application | Compression, Injection, Transfer |
---|---|
Durometer | 75 |
Polymer Type | Viton GFLTS™ |
Color | Black |
Form | Extruded Pre-Form, Slab, Strip, Calendered Sheet |
Minimum TensIle Strength (PSI) | 2800 |
Stock | Yes |
Send us a message and one of our customer service representatives will contact you within 24 hours.
Contact ×